True MFG Co.

True Manufacturing TPP-AT-44-HC 44" Single-Door Pizza Prep Table with Angled Top and Hydrocarbon Refrigerant

$4,720.36 ~~Precio rebajado$15,620.00ahorra $10,899.64~~

Key Features:

Factory-engineered, self-contained capillary tube refrigeration system using environmentally friendly R290 hydrocarbon refrigerant with zero (0) ozone depletion potential (ODP) and a global warming potential (GWP) of just three (3)
High-capacity, factory-balanced forced-air refrigeration maintains a holding range of 33°F to 41°F (0.5°C to 5°C), with guided airflow ensuring uniform temperatures throughout the cabinet interior and food pan rail
Patented 13° angled top with stainless steel, foam-insulated lids that keep pan temperatures colder, lock in freshness, and minimize condensation; NSF/ANSI Standard 7 compliant for open food product
Refrigerated pan rail comes standard with six (1/3-size) clear polycarbonate insert pans (12-3/4"L x 6-1/4"W x 6"D); extra-deep 19-1/2" full-length removable high-density white polyethylene cutting board included
Stainless steel top, front, and ends with corrosion-resistant GalFan-coated steel back; NSF-approved interior lined with clear-coated aluminum and coved corners on the stainless steel floor
Epoxy-coated evaporator eliminates corrosion potential; reverse condensing fan motor activates for 20 seconds on compressor start to blow dust and debris off the condensing coil, extending unit lifespan and efficiency
Front discharge design allows installation flush against a wall or in a corner without requiring rear or side ventilation clearance
Cabinet and solid door insulated with high-density polyurethane with no ozone depletion or global warming potential; 1-piece magnetic door gasket is removable without tools for easy cleaning
Two adjustable, heavy-duty PVC-coated wire shelves with 4 chrome-plated shelf clips each, adjustable in 1/2" increments for flexible interior storage configuration
Mounted on 5"-diameter stem casters for easy repositioning; 36" work surface height; rated at 3.9A, 1/4 HP, 115V/60Hz/1-phase with NEMA 5-15P plug
7-year parts and labor warranty plus 7-year compressor warranty for long-term investment protection

Denver

Normalmente está listo en 2 a 4 días

Fresno

Normalmente está listo en 2 a 4 días

True Manufacturing TPP-AT-44-HC 44" Single-Door Pizza Prep Table with Angled Top and Hydrocarbon Refrigerant

$4,720.36~~$15,620.00~~

Detailed Description

The True Manufacturing TPP-AT-44-HC is a 44-inch single-door pizza prep table engineered for high-volume commercial kitchens, holding 33°F to 41°F using a factory-balanced, forced-air R290 hydrocarbon refrigeration system with zero ozone depletion potential. Its 13° angled top houses six 1/3-size polycarbonate insert pans protected by patented, foam-insulated stainless steel lids that lock in freshness and minimize condensation. An extra-deep 19-1/2 removable high-density polyethylene cutting board provides a sanitary, spacious prep surface, while the front discharge design allows the unit to be placed flush against a wall or in a corner. A self-cleaning reverse condensing fan motor automatically clears the condensing coil of dust and debris, extending equipment life and maintaining peak efficiency.

Product Details

Consistent Cold Holding

Factory-balanced forced-air system maintains 33°F to 41°F throughout the cabinet and pan rail.

6-Pan Refrigerated Rail

Comes standard with six 1/3-size clear polycarbonate insert pans and angled 13° foam-insulated lids.

Easy-Clean Design

Tool-free removable door gasket and epoxy-coated evaporator resist corrosion and simplify maintenance.

True TPP-AT-44-HC 44-inch pizza prep table with angled lid open revealing six insert pans in the refrigerated pan rail and stainless steel prep surface

Built for the Demands of Pizza Production

The True TPP-AT-44-HC delivers an extra-deep 19-1/2" removable cutting board, giving operators a generous prep surface for large-format pizzas. The high-density white polyethylene board is sanitary and durable, while the patented foam-insulated lids angle at 13° to keep ingredients colder longer, lock in freshness, and minimize condensation.

Stainless steel top, front, and ends for lasting durability
Corrosion-resistant GalFan-coated steel back panel
Front discharge design - no rear ventilation space required
Positive-seal doors swing within cabinet dimensions

Key Specifications

Capacity11.4 cu. ft. | 1 solid door | 2 shelves

Temperature Range33°F to 41°F (0.5°C to 5°C)

Electrical115V/60Hz/1ph | 3.9A | NEMA 5-15P

Warranty7-Year Parts & Labor | 7-Year Compressor

Dimensions (W x D x H)44-3/4" x 36-3/8" x 44-5/8"

RefrigerantR290 Hydrocarbon | Zero ODP | Low GWP

Performance Features at a Glance

1/3-Size Insert Pans Included

19.5"

Deep Cutting Board

36"

Standard Work Surface Height

Ideal For:

Pizzerias Italian Restaurants Fast-Casual Kitchens Sandwich & Salad Stations High-Volume Commercial Kitchens

From the Cresco Resco Team

Why You'll Love It

The True TPP-AT-44-HC is a purpose-built pizza prep table that pairs professional cold-holding performance with thoughtful operator-focused details, making it a reliable centerpiece of any high-output kitchen line.

Perfect for pizzerias and fast-casual restaurants needing a compact, front-discharge refrigerated prep station that fits flush against any wall.
The reverse condensing fan motor automatically clears dust from the condensing coil, reducing maintenance demands and extending equipment lifespan.
NSF/ANSI Standard 7 compliant and backed by a 7-year parts, labor, and compressor warranty for long-term peace of mind.

Specifications

Brand	True Manufacturing
Model	TPP-AT-44-HC
Series	TPPAT Series
Type	Pizza Prep Table, Solid Door, Angled Top
Number of Doors	1
Number of Shelves	2 (Adjustable, Heavy-Duty PVC-Coated Wire)
Shelf Dimensions	25" W x 27 3/4" D
Shelf Adjustment Increments	1/2"
Capacity	11.4 cu. ft.
Temperature Range	33°F to 41°F (0.5°C to 5°C)
Refrigerant	R290 Hydrocarbon (0 ODP / 3 GWP)
Refrigeration System	Self-Contained, Factory-Balanced, Forced-Air, Capillary Tube
Defrost System	Automatic
Overall Dimensions (W x D x H)	44 3/4" x 36 3/8" x 44 5/8"
Work Surface Height	36"
Cutting Board Dimensions (W x D)	44 3/4" x 19 1/2"
Pan Rail	6 x 1/3-Size Clear Polycarbonate Insert Pans Included
Pan Dimensions (L x W x D)	12 3/4" x 6 1/4" x 6"
Max Pan Depth	6"
Top Angle	13°
Air Discharge	Front Discharge
Voltage	115V / 60 Hz / 1 Ph
Amperage	3.9 A
Horsepower	1/4 HP
NEMA Configuration	5-15P
Installation Type	Freestanding
Casters	5" Diameter Stem Casters
Weight	330 lbs (150 kg)
Warranty	7-Year Parts & Labor; 7-Year Compressor
Certifications	NSF/ANSI Standard 7