True MFG Co.

True Manufacturing TPP-AT-119D-2-HC 119" Angled Top Pizza Prep Table with Hydrocarbon Refrigerant

$14,684.50 ~~Precio rebajado$48,592.00ahorra $33,907.50~~

Key Features:

119 1/4" wide refrigerated pizza prep table with a 3-door and 2-drawer cabinet base, delivering 46.1 cu. ft. of total storage capacity across the pan rail and refrigerated base
Top pan rail includes 15 third-size (1/3) food pans, 6" deep, with a patented 13-degree angled top and foam-insulated stainless steel lift-up lids that lock in freshness, maintain cold temperatures, and minimize condensation
Extra-deep 19 1/2" full-length removable high-density white polyethylene cutting board provides a dedicated, sanitary pizza assembly surface across the entire unit width
Cabinet base features 3 solid doors and 2 drawers; each drawer accommodates two full-size 12" x 20" x 8"-deep pans (sold separately), with tool-free removable 1-piece magnetic gaskets and heavy-duty removable stainless steel drawer slides
Guided forced-air refrigeration system maintains uniform temperatures of 33-41 degrees F throughout both the pan rail and cabinet sections; epoxy-coated evaporator eliminates corrosion risk
Eco-friendly R290 hydrocarbon refrigerant with 0 ozone depletion potential (ODP) and global warming potential (GWP) of 3, powered by a 3/4 HP compressor at 115V/60Hz/1ph (NEMA 5-15P)
Front-breathing design allows placement flush against walls or adjacent equipment; condenser is slide-out accessible from the front panel for easy maintenance
Automatic reverse condensing fan motor activates for 20 seconds each time the compressor starts, continuously blowing dust and debris off the condensing coil to sustain peak efficiency
Stainless steel exterior top, front, and sides with corrosion-resistant GalFan coated steel back; clear-coated aluminum interior with stainless steel floor and coved corners for easy cleaning
Foamed-in-place polyurethane insulation provides structural rigidity and superior temperature retention throughout the cabinet walls
Eight 5" stem casters (4 per side) for easy repositioning and cleaning; 12" recessed door and drawer handles; 8 adjustable wire shelves (2 per door section) adjustable in 1/2" increments
NSF/ANSI Standard 7 compliant for open food product; 7-year parts and labor warranty with 7-year compressor warranty

Denver

Normalmente está listo en 2 a 4 días

Fresno

Normalmente está listo en 2 a 4 días

True Manufacturing TPP-AT-119D-2-HC 119" Angled Top Pizza Prep Table with Hydrocarbon Refrigerant

$14,684.50~~$48,592.00~~

Detailed Description

The True Manufacturing TPP-AT-119D-2-HC is a 119 1/4 commercial pizza prep table engineered for high-volume pizzerias, universities, and restaurants that demand consistent refrigerated performance across a wide prep footprint. The angled top pan rail holds 15 third-size food pans behind foam-insulated, stainless steel lift-up lids that lock in cold air and minimize condensation, while a full-length 19 1/2-deep removable polyethylene cutting board provides a dedicated pizza assembly surface. Below the work surface, a refrigerated cabinet base offers 46.1 cu. ft. of storage across three doors and two drawers, with each drawer accommodating two full-size, 8-deep pans. The unit utilizes eco-friendly R290 hydrocarbon refrigerant with a front-breathing design, allowing it to be placed against walls or other equipment, and an automatic reverse condensing fan motor keeps the coil clear of dust to maintain peak efficiency.

Product Details

Consistent Cold Holding

Maintains 33-41°F across the pan rail and cabinet base via a guided forced-air system.

High-Capacity Pan Rail

Holds 15 included third-size pans under foam-insulated, angled stainless steel lids.

Commercial-Grade Construction

Stainless steel front, top, and sides with an aluminum interior and stainless steel floor.

True TPP-AT-119D-2-HC 119-inch pizza prep table with open foam-insulated lids revealing pan rail, two stacked drawers on left, and two solid doors on right

Full-Length Prep Station Built for Pizza

At 119-1/4 inches wide, this True prep table delivers a spacious, organized workspace purpose-built for high-volume pizza operations. The extra-deep 19-1/2-inch removable polyethylene cutting board spans the full length of the unit, offering ample room for assembly. Beneath the work surface, three solid doors and two drawers provide refrigerated storage for backup ingredients and full-size food pans.

Full-length, 19-1/2" deep removable cutting board included
3-door and 2-drawer refrigerated base with 8 adjustable wire shelves
Each drawer accommodates two 12" x 20" x 8"-deep full-size pans
5-inch stem casters for easy maneuverability and cleaning access

Key Specifications

Capacity46.1 cu. ft.

Temperature Range33-41°F

Power115V / 60Hz / 1ph, 7.1A, 3/4 HP

RefrigerantR-290 Hydrocarbon (eco-friendly)

Plug TypeNEMA 5-15P

ComplianceNSF/ANSI Standard 7

At a Glance

119-1/4"

Overall Width

Included 1/3-Size Pans

3 + 2

Doors + Drawers

From the Cresco Resco Team

Why You'll Love It

The True TPP-AT-119D-2-HC is a heavy-duty, full-length pizza prep table designed to keep high-volume pizza operations running smoothly and efficiently.

Ideal for busy pizzerias, universities, and restaurants that need a reliable, large-capacity prep station.
Foam-insulated angled lids, an epoxy-coated evaporator, and an auto-reverse condensing fan motor ensure lasting performance with minimal maintenance.
The front-breathing design allows flexible placement against walls or adjacent equipment, maximizing your kitchen layout.

Specifications

Model	TPP-AT-119D-2-HC
Width	119 1/4"
Depth	35 3/8"
Height	44 5/8"
Work Surface Height	36"
Capacity	46.1 cu. ft.
Weight	725 lbs (329 kg)
Temperature Range	33°F - 41°F
Refrigerant	R-290 (Hydrocarbon)
Horsepower	3/4 HP
Voltage	115V / 60 Hz / 1 Phase
Amperage	7.1 A
Plug Type	NEMA 5-15P
Number of Doors	3
Number of Drawers	2
Number of Shelves	8
Pan Rail Capacity	15 x 1/3 size pans (6" deep, included)
Drawer Pan Capacity	(2) 12" x 20" x 8" full-size pans per drawer (not included)
Cutting Board Depth	19 1/2" (removable, full-length, high-density polyethylene)
Pan Angle	13° angled top
Exterior Material	Stainless steel front, top, and sides; GalFan coated steel back
Interior Material	Clear-coated aluminum with stainless steel floor
Insulation	Foamed-in-place polyurethane
Casters	5" stem casters
Airflow Design	Front-breathing / front discharge
Warranty	7-Year Parts & Labor; 7-Year Compressor
Certifications	NSF/ANSI Standard 7