CDN

CDN INTP626X ProAccurate HACCP Waterproof Infrared/Thermocouple Probe Thermometer

$145.11 ~~Precio rebajado$207.00ahorra $61.89~~

Key Features:

Dual-Function Infrared and Thermocouple Design: Performs non-contact surface temperature readings via infrared and precise internal temperature measurements via the folding Type-K thermocouple probe, eliminating the need for two separate tools.
Wide Temperature Range: Infrared measures -67 to +482°F (-55 to +250°C); the thermocouple probe extends the range to -67 to +626°F (-55 to +330°C) for versatility across virtually all food service applications.
HACCP Check Lights and Icons: Color-coded LED indicator lights provide at-a-glance verification of safe versus unsafe temperature zones, supporting HACCP compliance and streamlining kitchen temperature monitoring routines.
Waterproof and Shatterproof Construction: Food-safe ABS plastic housing with waterproof and shatterproof ratings withstands demanding commercial kitchen environments, and the unit is NSF certified.
BioCote Antimicrobial Protection: Integrated BioCote antimicrobial additives in the housing material actively inhibit bacteria growth on the surface, maintaining sanitary standards between uses.
304 Stainless Steel Probe with 1.5 mm Thin Tip: The 4.5-inch (11.5 cm) stainless steel probe features a precision 1.5 mm diameter tip for accurate penetration readings in thin cuts and delicate foods.
2.5:1 Distance-to-Spot Ratio with Pre-Configured Emissivity: The 2.5:1 D:S ratio with a fixed 0.95 emissivity setting is optimized for food surface scanning, delivering reliable infrared readings without manual calibration adjustments.
Simultaneous Dual LCD Display with HOLD Feature: Large LCD displays both infrared and thermocouple readings at the same time, with a data-hold/lock function for continuous scanning and maximum/minimum temperature tracking.
White Light Target Illumination: Built-in target light assists in precise aiming of the infrared sensor in low-light prep areas and walk-in coolers.
Rapid 1-Second Response Time with ±2°F Accuracy: Delivers fast, accurate readings with ±2°F (1°C) accuracy and a 1-second response time to keep line operations moving efficiently.
Auto-Off and Long Battery Life: Auto-off activates after 15 seconds of inactivity to conserve power; includes two AAA batteries with up to 18 hours of battery life.
Includes Protective Storage Pouch: Comes with a durable fabric storage case to protect the unit and probe during storage or transport, keeping the tool ready for daily service.

Denver

Normalmente está listo en 2 a 4 días

Fresno

Normalmente está listo en 2 a 4 días

CDN INTP626X ProAccurate HACCP Waterproof Infrared/Thermocouple Probe Thermometer

$145.11~~$207.00~~

Detailed Description

The CDN INTP626X is a dual-function professional thermometer that combines non-contact infrared surface measurement with a folding Type-K thermocouple probe for precise internal readings, making it a true all-in-one temperature solution for commercial kitchens. The infrared sensor covers -67 to +482°F while the thermocouple extends the range to +626°F, and both readings can be displayed simultaneously on the large LCD with HOLD and MAX/MIN tracking. Built with food-safe ABS housing featuring BioCote Antimicrobial Protection, a waterproof and shatterproof body, and a 304 stainless steel 4.5-inch probe with a 1.5 mm tip, this instrument is engineered to stand up to demanding foodservice environments. HACCP check lights and icons deliver instant visual confirmation of safe or unsafe temperature zones, while the 2.5:1 distance-to-spot ratio, preconfigured 0.95 emissivity, and ±2°F accuracy ensure reliable readings every time. NSF listed and backed by CDN's reputation for precision measurement tools, the INTP626X ships with two AAA batteries, a protective pouch, and offers 18 hours of battery life with auto-off after 15 seconds.

Product Details

Wide Dual-Range Coverage

Infrared reads -67 to +482°F; Type-K thermocouple probe extends to -67 to +626°F for deep internal measurements.

HACCP Check Lights

Color-coded indicator lights and icons make food safety temperature monitoring fast and effortless at a glance.

NSF Certified and Waterproof

Waterproof, shatterproof housing with BioCote Antimicrobial Protection and NSF certification for commercial kitchens.

CDN INTP626X thermometer with folding thermocouple probe extended alongside black fabric storage pouch

Two Thermometers in One Tool

The CDN INTP626X ProAccurate HACCP Infrared/Thermocouple Thermometer delivers both non-contact surface readings and precise internal temperature measurements from a single handheld device. The Type-K thermocouple probe folds away cleanly when not in use, and the included storage pouch keeps everything protected between uses.

Infrared range: -67 to +482°F / -55 to +250°C
Thermocouple probe range: -67 to +626°F / -55 to +330°C
4.5 in. (11.43 cm) probe with 1.5 mm thin tip
Includes probe storage case / pouch

Close-up of CDN INTP626X LCD display showing dual temperature readings with HACCP indicator lights, Mode, Scan, and Probe buttons

Large LCD with Simultaneous Dual Readings

The clear, large LCD displays both infrared surface and thermocouple probe temperatures at the same time in DUAL mode. Max and minimum temperature tracking, a hold/lock function for continuous scanning, and Fahrenheit/Celsius switching keep readings accessible and versatile for any application.

Simultaneous dual-temperature display in DUAL mode
Maximum, minimum, and lock for continuous scanning
Resolution: 0.5° with ±2°F (1°C) accuracy
1-second rapid response time
Auto-off after 15 seconds to conserve battery

Back view of CDN INTP626X thermometer showing infrared sensor lens and white light target illumination port

Precision Infrared Sensor for Surface Readings

The rear-mounted infrared sensor provides non-contact surface temperature measurement with a 2.5:1 distance-to-spot ratio and a preconfigured emissivity of 0.95, optimized specifically for food surface applications. White light target illumination helps aim the sensor accurately without any contact required.

Distance-to-spot ratio: 2.5:1
Preconfigured emissivity: 0.95 (ideal for food surfaces)
White light target illumination for precise aiming
Food-safe ABS housing with BioCote Antimicrobial Protection

Key Specifications

Infrared Range-67 to +482°F / -55 to +250°C

Thermocouple Range-67 to +626°F / -55 to +330°C

Accuracy±2°F (1°C)

Response Time1 Second

Probe304 Stainless Steel, 4.5 in., 1.5 mm tip

Battery Life18 Hours (2 AAA included)

From the Cresco Resco Team

Why You'll Love It

The CDN INTP626X gives professional kitchen operators a single, reliable tool for both non-contact surface scanning and precise internal temperature verification.

Perfect for HACCP-compliant kitchens, foodservice operations, and restaurants requiring accurate, rapid temperature checks.
Dual infrared and Type-K thermocouple functions eliminate the need for two separate thermometers.
NSF certified, waterproof, and protected with BioCote Antimicrobial technology for safe, sanitary everyday use.

Specifications

Model	INTP626X
Brand	CDN Measurement Tools
Type	Dual-Function Infrared / Thermocouple Probe Thermometer
Infrared Temperature Range	-67°F to +482°F (-55°C to +250°C)
Thermocouple Temperature Range	-67°F to +626°F (-55°C to +330°C)
Accuracy	±2°F (1°C)
Infrared Accuracy	±1.1°F
Probe Accuracy	±0.9 - 1.8°F
Resolution	0.5°
Response Time	1 second
Sensor Type	Type-K Thermocouple
Distance-to-Spot Ratio	2.5:1
Emissivity	0.95 (pre-configured)
Display	Large LCD, Digital; Display Size: 3/4" x 1"
Temperature Scale	Fahrenheit and Celsius
Housing Material	Food-safe ABS plastic with BioCote® antimicrobial protection
Probe Material	304 stainless steel
Overall Dimensions	1.50" W x 7.48" H x 0.87" D (3.81 W x 17.78 H x 2.21 D cm)
Probe Length	4.5" (11.5 cm)
Probe Tip Diameter	1.5 mm
Waterproof	Yes
Battery	2 x AAA alkaline (included)
Battery Life	18 hours
Auto-Off	After 15 seconds
Certifications	NSF
Included Accessories	Storage pouch
Country of Origin	China
UPC	400014085763