Atosa Catering Equipment

Atosa MKC23GR 23" Direct Draw Keg Cooler, 7.1 cu. ft.

$1,464.00 ~~Precio rebajado$2,031.00ahorra $567.00~~

Key Features:

Full Stainless Steel Construction: Features stainless steel exterior and interior for a durable, professional-grade finish that is easy to clean and corrosion-resistant in demanding bar environments.
Dixell Digital Electronic Controller: Industry-leading Dixell digital controller provides precise temperature management, maintaining draft beer at optimal serving temperatures for consistent pour quality.
Heavy-Duty Embraco Compressor with R290 Refrigerant: Equipped with a 1/7 HP Embraco compressor utilizing environmentally friendly R290 hydrocarbon refrigerant, delivering reliable, energy-efficient cooling with reduced environmental impact.
7.1 Cu. Ft. Capacity / Full Half-Barrel Keg Support: Interior accommodates a standard 1/2 barrel (full keg) with 7.1 cubic feet of usable space, making it ideal for high-volume bar and restaurant draft beer service.
Dual Faucet Tap Tower with Manifold and Ball Taps Included: Standard dual-tap stainless steel tower ships complete with manifold and ball taps, allowing immediate setup and the ability to serve two beers simultaneously from one unit.
Slide-Out Compressor Assembly: Rear-mounted, self-contained refrigeration system with a slide-out compressor assembly greatly simplifies routine maintenance and service access without moving the unit.
Stainless Steel Drip Tray: Integrated stainless steel drip tray captures spills and overflow, keeping the bar top clean and reducing cleanup time during busy service periods.
Magnetic Door Gaskets and Standard Door Lock: NSF-approved magnetic door gaskets ensure a positive, energy-efficient seal on every closure, while the standard keyed door lock secures keg contents and controls access.
LED Interior Lighting: Energy-saving LED interior lights provide bright, long-lasting illumination for quick visual checks of interior contents.
Recessed Door Handle and Pre-Installed Casters: Ergonomic recessed pull handle prevents snagging in tight spaces, while pre-installed heavy-duty swivel casters with brakes allow easy repositioning on the floor.
cETLus and ETL-Sanitation Certified: Meets rigorous safety and sanitation standards; rated 115V/60/1-ph, 2.3 amps, NEMA 5-15P for straightforward installation on standard commercial circuits.

Denver

Normalmente está listo en 2 a 4 días

Fresno

Normalmente está listo en 2 a 4 días

Atosa MKC23GR 23" Direct Draw Keg Cooler, 7.1 cu. ft.

$1,464.00~~$2,031.00~~

Detailed Description

The Atosa MKC23GR is a 23-inch direct draw keg cooler purpose-built for commercial bars, restaurants, and beverage operations, offering a 7.1 cu. ft. interior sized to hold one 1/2 barrel (full keg). Constructed with a stainless steel interior and exterior, the unit maintains precise draft temperatures between 33°F and 40°F via a Dixell digital controller paired with a heavy-duty Embraco compressor running on environmentally friendly R290 refrigerant. A standard dual-faucet stainless steel tap tower comes complete with manifold and ball taps, while the stainless steel drip tray and recessed door handle round out the bar-ready design. Pre-installed casters allow easy repositioning on the floor, and a slide-out compressor assembly keeps routine maintenance fast and hassle-free.

Product Details

Precise Temperature Control

Dixell digital controller maintains 33°F to 40°F for perfectly chilled draft beer every pour.

Durable Stainless Construction

Full stainless steel exterior and interior with a slide-out compressor assembly for easy servicing.

Ready-to-Serve Setup

Dual-tap stainless steel tower, stainless drip tray, and included manifold and ball taps - pour from day one.

Atosa MKC23GR 23-inch direct draw keg cooler front view with dual-tap stainless steel tower

Commercial-Grade Draft Beer Performance

The Atosa MKC23GR is a 23" direct draw keg cooler built to handle the demands of bars, restaurants, and high-traffic commercial environments. With a 7.1 cu. ft. interior, it accommodates a full 1/2 barrel keg while its rear-mounted, self-contained refrigeration keeps the cabinet compact and service-friendly.

7.1 cu. ft. capacity fits one full 1/2 barrel keg
Rear-mounted, self-contained refrigeration system
cETLus and ETL-Sanitation certified for commercial use

Atosa MKC23GR keg cooler with door open revealing stainless steel interior and wire shelf

Stainless Steel Interior Built to Last

The fully stainless interior resists corrosion and is straightforward to clean, while the magnetic door gasket ensures a positive, energy-efficient seal on every close. A keyed door lock provides secure access control in busy service environments.

Stainless steel interior walls resist moisture and corrosion
Magnetic door gasket creates a positive, airtight seal
Standard door lock keeps contents secure
Interior LED lighting for clear visibility

Atosa MKC23GR keg cooler three-quarter angle view showing dual-tap tower and stainless drip tray

Environmentally Responsible Refrigeration

The heavy-duty Embraco compressor runs on R290 hydrocarbon refrigerant, a CFC-free, low-environmental-impact propane-based refrigerant that delivers excellent thermodynamic performance. Its variable capacity design saves energy and reduces operating noise compared to conventional compressors.

Embraco compressor with R290 refrigerant - CFC-free
Slide-out compressor assembly simplifies routine maintenance
115V / 60Hz / 1-phase, 2.3 amps, NEMA 5-15P plug

Atosa MKC23GR keg cooler angled view highlighting dual-tap tower, recessed door handle, and pre-installed casters

Designed for Effortless Bar Operations

Every detail supports fast-paced service. Pre-installed 4-inch swivel casters with brakes make repositioning easy, while the recessed door handle prevents snagging in tight spaces. The dual-tap stainless tower comes complete with manifold and ball taps included so the unit is ready to connect and pour right away.

Pre-installed casters with brakes for controlled mobility
Recessed door handle for a clean, snag-free profile
Dual-tap tower with manifold and ball taps included
Stainless steel drip tray keeps the service area tidy

From the Cresco Resco Team

Why You'll Love It

The Atosa MKC23GR delivers reliable, cold draft beer in a compact, fully featured package built for commercial bar environments.

Ideal for bars, restaurants, and high-volume service operations that need a dependable direct draw system.
The Dixell digital controller, Embraco compressor, and stainless construction set a high standard for performance and longevity in its class.
Pair with a CO2 regulator and your preferred keg brand for a complete, ready-to-serve draft beer station right out of the box.

Specifications

Brand	Atosa
Model	MKC23GR
Category	Direct Draw Keg Cooler
Capacity	7.1 cu. ft. (1/2 barrel / full keg)
Number of Doors	1
Tap Towers	1 column / tower (dual tap)
Number of Taps	2
Temperature Range	33°F - 40°F
Digital Controller	Dixell Digital Controller
Compressor	Heavy Duty Embraco
Compressor Location	Rear Mounted
Refrigerant	R290 Hydrocarbon (Environmentally Friendly)
Horsepower	1/7 HP
Voltage	115V / 60Hz / 1-Phase
Amperage	2.3 Amps
Plug Type	NEMA 5-15P
Exterior Finish	Stainless Steel
Interior Finish	Stainless Steel
Door Gaskets	Magnetic (NSF Approved)
Door Lock	Yes (Standard)
Drip Tray	Stainless Steel
Interior Lighting	Yes (LED)
Casters	Pre-Installed 3.5" Casters with Bumper & Brake
Included Accessories	Manifold and Ball Taps
Width	23"
Depth	31.1"
Height (Overall with Tower)	54.8"
Product Weight	132 lbs
Certifications	cETLus, ETL-Sanitation, Energy Star
Warranty	2-Year Parts & Labor / 5-Year Compressor Part