True MFG Co.

True Manufacturing TSSU-72-10-HC 72" 3-Door Sandwich/Salad Prep Table with Hydrocarbon Refrigerant

$6,138.29 ~~Sale price$20,312.00you save $14,173.71~~

Key Features:

R290 Hydrocarbon Refrigerant: Factory engineered, self-contained capillary tube system uses environmentally friendly R290 refrigerant with zero (0) ozone depletion potential (ODP) and three (3) global warming potential (GWP), meeting modern environmental standards.
Patented Forced-Air Refrigeration: Holds product temperatures between 33°F and 41°F (0.5°C to 5°C) throughout food pans and cabinet interior, ensuring consistent food safety compliance (ANSI/NSF-7 listed).
72" Three-Door Configuration with 10-Pan Top: Generous 72" footprint with 3 solid doors and a 10-pan top rail, ideal for high-volume sandwich and salad preparation lines.
Stainless Steel Exterior with Patented Insulated Lid and Hood: All stainless steel front, top, and ends with a corrosion-resistant GalFan coated steel back. The patented foam insulated lid and hood keep pan temperatures colder, lock in freshness, minimize condensation, and are fully removable for easy cleaning.
Durable, Sanitary Interior Construction: NSF-approved clear coated aluminum liner with a stainless steel floor and coved corners for easy cleaning and long-term durability.
Full-Length Removable Cutting Board Included: 11-3/4" (299 mm) deep, 1/2" (13 mm) thick, sanitary high-density NSF-approved white polyethylene cutting board provides a tough, food-safe preparation surface.
Self-Cleaning Condenser Fan Motor: The evaporator fan motor reverses direction for 20 seconds after each compressor start cycle, automatically removing dirt, dust, and debris from the condensing coil to extend unit lifespan and maintain optimal efficiency.
Easy-Access Condensing Unit: The condensing unit slides out from the rear of the cabinet for quick, convenient access during routine preventative maintenance and service.
Eco-Friendly Foamed-In-Place Insulation: High-density polyurethane insulation with zero ODP and zero GWP throughout the cabinet walls maximizes thermal efficiency and reduces energy consumption.
Heavy-Duty PVC Coated Wire Shelves: Includes 6 shelves designed for durability and ease of cleaning in demanding commercial environments.
Standard Electrical Specs: Operates at 115V/60Hz/1-phase with a NEMA 5-15P plug configuration, drawing 7.2 amps for straightforward installation in most commercial kitchens.
Extensive Accessory Options: Configurable with seismic/flanged legs, castors, barrel locks, single or double overshelves, sneezeguards, flat lids, crumb catchers, pan dividers, an exterior digital temperature display, and ADA-compliant (34" work surface) configurations.

Denver

Usually ready in 2-4 days

Fresno

Usually ready in 2-4 days

True Manufacturing TSSU-72-10-HC 72" 3-Door Sandwich/Salad Prep Table with Hydrocarbon Refrigerant

$6,138.29~~$20,312.00~~

Detailed Description

The True TSSU-72-10-HC is a 72-inch, three-door sandwich and salad prep table engineered for the demands of high-volume commercial kitchens. Its factory-engineered, self-contained capillary tube system runs R290 hydrocarbon refrigerant, achieving zero ozone depletion potential and ultra-low global warming potential. True's patented forced-air design delivers steady 33°F to 41°F temperatures throughout all 10 food pans and the cabinet interior, keeping ingredients fresh through every service. Built with an all-stainless steel exterior, a foam-insulated patented lid and hood, and an NSF-approved white polyethylene cutting board, this unit combines durability with food safety compliance. Designed, engineered, and manufactured in the USA, the TSSU-72-10-HC is backed by True's industry-leading local service network.

Product Details

Precise Temperature Holding

Patented forced-air design maintains 33°F to 41°F throughout food pans and cabinet interior.

NSF-7 Certified

Complies with ANSI/NSF-7 standards, with R290 refrigerant offering zero ozone depletion potential.

Easy-Clean Design

Removable foam-insulated lid and hood, plus a full-length NSF-approved cutting board for effortless maintenance.

True TSSU-72-10-HC 72-inch 3-door stainless steel sandwich and salad prep table with open pan lid showing refrigerated top compartment

Built for High-Volume Sandwich and Salad Stations

The True TSSU-72-10-HC delivers a 72-inch solid-door sandwich and salad prep table engineered to handle the demands of a busy commercial kitchen. Three solid stainless steel doors provide access to a refrigerated base, while the top accommodates 10 food pans kept consistently cold by a factory-engineered, self-contained capillary tube system.

Stainless steel front, top, and ends with corrosion-resistant GalFan coated steel back
3 solid doors with 6 heavy-duty PVC-coated wire shelves in the refrigerated base
Foamed-in-place high-density polyurethane insulation with zero ODP and zero GWP
Stainless steel floor with coved corners for easy interior cleaning

Key Specifications

Width72 in. (3 Sections)

Pan Capacity10 Pans (Top)

Electrical115V / 60Hz / 1-Phase, 7.2A, NEMA 5-15P

Weight435 lbs (198 kg)

Temperature Range33°F to 41°F (0.5°C to 5°C)

Cutting Board11-3/4 in. deep x 1/2 in. thick, NSF-approved polyethylene, included

Performance at a Glance

72"

Work Surface Width

Top Food Pans

33-41°F

Holding Temperature

Ideal For

Sandwich stations Salad bars Deli operations Pizza topping lines High-volume restaurants Fast-casual kitchens

From the Cresco Resco Team

Why You'll Love It

The True TSSU-72-10-HC is the definitive 72-inch sandwich and salad prep table for operators who demand reliable cold holding, durable construction, and eco-conscious refrigeration in one package.

Perfect for high-volume sandwich stations, deli lines, and salad prep in restaurants, catering facilities, and food service operations.
The factory-balanced R290 refrigerant system delivers consistent 33°F to 41°F performance with zero ozone depletion potential and minimal global warming impact.
Stainless steel exterior with a removable insulated lid and included NSF-approved cutting board make daily setup and cleanup fast and sanitary.

Specifications

Model	TSSU-72-10-HC
Brand	True Manufacturing
Type	Solid Door Sandwich/Salad Prep Table
Number of Doors	3
Number of Shelves	6
Pan Capacity	10 Pans
Temperature Range	33°F to 41°F (0.5°C to 5°C)
Refrigerant	R290 Hydrocarbon (Zero ODP, 3 GWP)
Refrigeration System	Factory engineered, self-contained, capillary tube
Width	72 in. (1829 mm)
Depth	31.1 in.
Height	46.7 in.
Weight	435 lbs (198 kg)
Voltage	115V / 60 Hz / 1 Phase
Amps	7.2 A
NEMA Configuration	5-15P
Exterior	Stainless steel front, top, and ends; GalFan coated steel back
Interior	NSF approved clear coated aluminum liner; stainless steel floor with coved corners
Insulation	Foamed-in-place high density polyurethane (Zero ODP, Zero GWP)
Lid	Stainless steel, patented, foam insulated; removable for easy cleaning
Cutting Board	11-3/4 in. (299 mm) deep, 1/2 in. (13 mm) thick, full-length removable white polyethylene (NSF approved)
Shelves	Heavy duty PVC coated wire
Certifications	ANSI/NSF-7
Access Type	Doors Only