True MFG Co.

True TMC-58-S-DS-SS-HC 58" Dual-Sided Stainless Steel School Milk Cooler

$5,831.55 ~~Sale price$19,297.00you save $13,465.45~~

Key Features:

Dual-Sided Access: Four stainless steel self-service doors (drop-front and flip-up on each side) allow simultaneous access from both sides of the unit, ideal for high-traffic cafeteria service lines.
All Stainless Steel Construction: Full stainless steel exterior (front, sides, back, and top) plus stainless steel interior walls and reinforced floor resist denting, corrosion, and heavy-duty use.
High Capacity Crate Storage: Designed to hold 16 standard 13"L x 13"D x 11-1/8"H milk crates (up to 1,024 half-pint cartons), supported by 3 heavy-duty floor racks.
Forced-Air Refrigeration with R290 Hydrocarbon Refrigerant: Factory-balanced, self-contained system maintains precise milk temperatures of 33°F to 38°F (0.5°C to 3.3°C) using eco-friendly R290 refrigerant with zero ozone depletion potential (ODP) and minimal global warming potential (GWP).
Electronically Commutated Fan Motors: Energy-efficient ECM evaporator fans deliver high-volume, low-velocity airflow for consistent cold holding and faster temperature recovery during peak use periods.
Self-Cleaning Condensing Fan Feature: Condensing fan motor reverses airflow for 20 seconds at compressor startup to purge dust and debris from the coil, helping maintain system efficiency and reducing maintenance needs.
Slide-Out Condensing Unit: Rear-accessible condenser slides out completely from behind the back grille for easy servicing and cleaning without disassembly.
Foamed-In-Place Polyurethane Insulation: High-density insulation fills the entire cabinet structure, eliminating voids and maximizing thermal retention for lower energy consumption.
Tool-Free Magnetic Door Gaskets: One-piece magnetic gaskets are removable without tools for fast, effortless cleaning and replacement.
Standard Door Locks and Built-In Drain: Locking doors protect product against theft and tampering; a clean-out floor drain simplifies sanitation and spill management.
Exterior Digital Temperature Display: Operators can monitor and set cabinet temperature from the exterior without opening doors, reducing temperature fluctuation.
NSF/ANSI Standard 7 Listed: Certified for the storage and/or display of packaged or bottled products, meeting commercial food safety requirements.
Mobile with Locking Casters: Four 4-inch swivel casters with locking fronts allow easy repositioning and secure placement during service.
Plug-and-Play Installation: Ships pre-wired from the factory; requires only a standard 115V/60Hz/1-phase, NEMA 5-15P dedicated outlet (9-ft. cord included).
Industry-Leading Warranty: Backed by a 7-year parts and labor warranty plus a 7-year compressor warranty for long-term peace of mind.

Denver

Usually ready in 2-4 days

Fresno

Usually ready in 2-4 days

True TMC-58-S-DS-SS-HC 58" Dual-Sided Stainless Steel School Milk Cooler

$5,831.55~~$19,297.00~~

Detailed Description

The True TMC-58-S-DS-SS-HC is a 58-inch dual-sided school milk cooler engineered for high-volume cafeteria environments, featuring an all-stainless steel exterior and interior for lasting durability and easy sanitation. Its factory-balanced, forced-air refrigeration system uses eco-friendly R290 hydrocarbon refrigerant to maintain temperatures between 33°F and 38°F, ensuring consistently cold, great-tasting milk with minimal product waste. The unit holds 16 standard 13L x 13D x 11-1/8H milk crates on three heavy-duty floor racks, while the dual-sided design with drop-front and flip-up stainless steel doors allows simultaneous access from both sides of a serving line. Cabinet insulation is foamed-in-place high-density polyurethane with zero ODP and zero GWP, and the slide-out condensing unit simplifies routine maintenance. Listed under NSF/ANSI Standard 7, the TMC-58-S-DS-SS-HC arrives fully pre-wired and ready for a 115V/60Hz/1-phase dedicated outlet.

Product Details

Precision Temperature Control

Forced-air system maintains milk temperatures between 33°F and 38°F with an exterior digital display for easy monitoring.

NSF Certified & Secure

Listed under NSF/ANSI Standard 7 with standard door locks and a 7-year parts, labor, and compressor warranty.

Easy Cleaning & Maintenance

Tool-free removable magnetic door gaskets, built-in clean-out drain, and a slide-out condensing unit simplify upkeep.

True TMC-58-S-DS-SS-HC 58-inch stainless steel dual-sided milk cooler with flip-up top door and drop-front lower door, digital temperature display on exterior

Dual-Sided Access for High-Volume Service

The TMC-58-S-DS-SS-HC features four stainless steel self-service doors -- two flip-up tops and two drop-front lowers -- accessible from both sides of the unit. Built for school cafeterias and busy foodservice lines, this design keeps product flowing quickly from either direction.

4 stainless steel self-service doors with drop-front and flip-up access
Dual-sided design serves two cafeteria lines simultaneously
Standard door locks protect against unauthorized access
Four 4-inch locking swivel casters for easy repositioning

Key Specifications

Crate Capacity16 crates (13"L x 13"D x 11-1/8"H)

Temperature Range33°F to 38°F (0.5°C to 3.3°C)

Electrical115V / 60Hz / 1-ph, 2.7A, NEMA 5-15P

Floor Racks3 heavy-duty floor racks included

ConstructionAll stainless steel exterior and interior

RefrigerantR290 Hydrocarbon (Zero ODP, Low GWP)

At a Glance

58"

Overall Width

Milk Crate Capacity

7-Yr

Parts, Labor & Compressor Warranty

Ideal For

School cafeterias High-volume foodservice lines Dual-line serving stations Universities & institutions Commercial kitchens

From the Cresco Resco Team

Why You'll Love It

The True TMC-58-S-DS-SS-HC is a commercial-grade, dual-sided milk cooler engineered to keep beverages colder, reduce waste, and withstand the demands of high-traffic foodservice environments.

Perfect for school cafeterias and institutional settings requiring simultaneous two-sided product access.
Eco-friendly R290 hydrocarbon refrigerant delivers reliable 33-38°F holding temperatures with zero ozone depletion potential.
Backed by a 7-year parts, labor, and compressor warranty with an NSF/ANSI Standard 7 listing for total peace of mind.

Specifications

Model	TMC-58-S-DS-SS-HC
Type	School Milk Cooler
Series	TMC Series
Access Style	Dual Sided (Top & Side)
Door Count	4
Crate Capacity	16 crates (13"L x 13"D x 11-1/8"H / 331 mm x 331 mm x 296 mm)
Half Pint Carton Capacity	1,024
Cubic Feet	24.6 cu. ft.
Floor Racks	3
Width	58-1/4 in. (1,479 mm)
Depth	33 in. (838 mm)
Height	41.6 in. (1,057 mm)
Weight	485 lbs (220 kg)
Exterior Material	Stainless Steel (front, sides, back, and top)
Interior Material	Stainless Steel walls and reinforced floor
Insulation	High-density polyurethane, foamed-in-place; 0 ODP / 0 GWP
Refrigerant	R290 Hydrocarbon (0 ODP / 3 GWP)
Refrigeration System	Self-contained, factory-engineered, capillary tube, forced-air
Temperature Range	33°F to 38°F (0.5°C to 3.3°C)
Compressor HP	1/5 HP
Voltage	115V / 60 Hz / 1 Phase
Amperage	2.7 A
NEMA Configuration	5-15P
Cord Length	9 ft.
Castors	(4) 4-in. swivel castors with locking front set
Certification	NSF/ANSI Standard 7
Warranty	7-Year Parts & Labor; 7-Year Compressor